User's Manual

User Manual
Page 35 of 43
5.
5.5.
5. Click to select Internet Protocol (TCP/IP) and click Pro
Click to select Internet Protocol (TCP/IP) and click ProClick to select Internet Protocol (TCP/IP) and click Pro
Click to select Internet Protocol (TCP/IP) and click Properties
pertiesperties
perties
6.
6.6.
6. Select “Use the following IP address:” and key in 10.0.10.1
Select “Use the following IP address:” and key in 10.0.10.1 Select “Use the following IP address:” and key in 10.0.10.1
Select “Use the following IP address:” and key in 10.0.10.1 for eg,
for eg, for eg,
for eg, as
as as
as
the IP address and 255.255.255.0 for the Subnet mask. Leave the
the IP address and 255.255.255.0 for the Subnet mask. Leave the the IP address and 255.255.255.0 for the Subnet mask. Leave the
the IP address and 255.255.255.0 for the Subnet mask. Leave the
other fields blank.
other fields blank.other fields blank.
other fields blank.
7.
7.7.
7. Click OK to commit the settings.
Click OK to commit the settings.Click OK to commit the settings.
Click OK to commit the settings.
To set a static IP address on your PC using Windows Vista:
1.
1.1.
1. Click Start > Control Panel
Click Start > Control PanelClick Start > Control Panel
Click Start > Control Panel