User's Manual

User Manual
Page 34 of 43
Wireless Router/AP, you will no longer have access to the device’s
Wireless Router/AP, you will no longer have access to the device’s Wireless Router/AP, you will no longer have access to the device’s
Wireless Router/AP, you will no longer have access to the device’s
web GUI. If you wish to change any settings on the
web GUI. If you wish to change any settings on the web GUI. If you wish to change any settings on the
web GUI. If you wish to change any settings on the WL559E
WL559EWL559E
WL559E, you need
, you need , you need
, you need
to
to to
to set a Static IP address on your PC. Just remember to set it back to
set a Static IP address on your PC. Just remember to set it back to set a Static IP address on your PC. Just remember to set it back to
set a Static IP address on your PC. Just remember to set it back to
“Obtain and IP address automatically” after you are done.
“Obtain and IP address automatically” after you are done. “Obtain and IP address automatically” after you are done.
“Obtain and IP address automatically” after you are done.
To set a static IP address on your PC using Windows XP:
1.
1.1.
1. Click Start > Control Panel
Click Start > Control PanelClick Start > Control Panel
Click Start > Control Panel
2.
2.2.
2. Click on Network and Inte
Click on Network and InteClick on Network and Inte
Click on Network and Internet Connections
rnet Connectionsrnet Connections
rnet Connections
3.
3.3.
3. Click on Network Connections
Click on Network ConnectionsClick on Network Connections
Click on Network Connections
4.
4.4.
4. Right
RightRight
Right-
--
-Click on the Network Adapter you will use to
Click on the Network Adapter you will use toClick on the Network Adapter you will use to
Click on the Network Adapter you will use to configure the
configure the configure the
configure the
WL559E
WL559EWL559E
WL559E and click Properties
and click Propertiesand click Properties
and click Properties