User's Manual

User Manual
Page 17 of 43
2.
2.2.
2. The device will redirect you to the web GUI once you launch your web
The device will redirect you to the web GUI once you launch your web The device will redirect you to the web GUI once you launch your web
The device will redirect you to the web GUI once you launch your web
browser. If in any case it does not, you may manually input
browser. If in any case it does not, you may manually input browser. If in any case it does not, you may manually input
browser. If in any case it does not, you may manually input
10.0.10.254 on the address bar.
10.0.10.254 on the address bar.10.0.10.254 on the address bar.
10.0.10.254 on the address bar. Input username as admin and
Input username as admin and Input username as admin and
Input username as admin and
password as admin. Click the
password as admin. Click thepassword as admin. Click the
password as admin. Click the OK button.
OK button.OK button.
OK button.
3.
3.3.
3. On your browser, c
On your browser, cOn your browser, c
On your browser, close the Wireless Site survey that displays the list
lose the Wireless Site survey that displays the list lose the Wireless Site survey that displays the list
lose the Wireless Site survey that displays the list
of the available Wireless networks. Select “Setup” from the WebUi
of the available Wireless networks. Select “Setup” from the WebUi of the available Wireless networks. Select “Setup” from the WebUi
of the available Wireless networks. Select “Setup” from the WebUi
homepage as shown below.
homepage as shown below.homepage as shown below.
homepage as shown below.
4.
4.4.
4. Select “Access Point” as shown below, Set the desired Wireless
Select “Access Point” as shown below, Set the desired Wireless Select “Access Point” as shown below, Set the desired Wireless
Select “Access Point” as shown below, Set the desired Wireless
network name and
network name and network name and
network name and the security type and then select “Apply”.The
the security type and then select “Apply”.The the security type and then select “Apply”.The
the security type and then select “Apply”.The
settings will
settings willsettings will
settings will then get applied.
then get applied.then get applied.
then get applied.
5.
5.5.
5. U
UU
Unplug the Ethernet cable from your PC and connect it to an available
nplug the Ethernet cable from your PC and connect it to an available nplug the Ethernet cable from your PC and connect it to an available
nplug the Ethernet cable from your PC and connect it to an available
Ethernet port in your modem
Ethernet port in your modemEthernet port in your modem
Ethernet port in your modem-
--
-router to match the hardware setup
router to match the hardware setup router to match the hardware setup
router to match the hardware setup
illustrated below.
illustrated below.illustrated below.
illustrated below.
Setup Diagram
Setup DiagramSetup Diagram
Setup Diagram