User's Manual

User Manual
Page 38 of 45
 WEP default key
You may choose from Hex to ASCII key format for your WEP key.
 WEP Key 1-4
Select the WEP that you will use to establish a connection between the router and client. Make sure
that the WEP key will match on your wireless client’s side. Enter the password in HEX (hexadecimal -
using characters 0-9, A-F) or ASCII (alphanumeric characters) format.
• WPA; WPA2; WPA/WPA2
Enter the password in the required field between 8-63 characters long.
• TKIP; AES; TKIP/AES
Choose the encryption that you would like to use. By default it is set to TKIP.
Applications
Port forwarding
Multiple connections are required by some applications, such as Internet games, video conferencing, Internet
telephony, and others. These applications have difficulties working through NAT (Network Address Translation).
This section is used to open multiple ports or a range of ports in your router and redirect data through those
ports to a single PC on your network. You can enter ports in various formats:
1. Rule Name – enter the rule name in the Rule Name box.
2. IP Address - enter the local network IP address of the device that you would like to port forward.
3. Port Range – enter the port number that you would like open on the required field
4. Protocol – choose the protocol that you would like to open then click Apply for the settings to take
effect.
Filtering