User's Manual
User Manual
Page 18 of 45
WPS (Wi-Fi Protected Setup)
WPS button allows you to activate Wi-Fi Protected Setup (WPS). When you press the WPS button it automatically
detects and connects wireless clients into the wireless network by broadcasting the wireless network settings
from your Access Point to you wireless device/s.
To setup WPS:
1. Press the WPS button on the router for two seconds, or until the LED blinks
2. Within 2 minutes, press the WPS button on the Wireless Client.
Note: WPS can only be used with wireless client devices that have a compatible WPS component.
Connect/Disconnect Button
Connect/Disconnect button allows you to connect/disconnect to the Internet using your 3.5G mobile broadband.
To Setup Connect/Disconnect Button:
1. Press the Connect/Disconnect button for 2 seconds to change the current status of your 3.5G mobile
broadband Internet connection.
Note: This button only applies for UMTS 3.5G Internet Connection type.