User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
Chapter 3 – Configuring Your Ethernet Network Card
The illustrated screen shots serve only as examples. For any dissimilarity, please follow the
instructions closely as prompted on your computer.
NOTE: Proceed with this section ONLY:
- if the Request IP Address from DHCP Server is disabled.
OR
- if the Request IP Address from DHCP Server is enabled but there is
no DHCP Server available.
3.1 For Windows
®
98 Second Edition / Windows
®
Me
Proceed with the steps below.
1. From your Windows desktop, right-click on the Network Neighborhood icon. Select
Properties.
2. From the Configuration tab, select TCP/IP-> xxx where xxx refers to the model of your
Ethernet Card that is connected to your Bridge Modem.
3. Click Properties as shown in Figure 3.
Figure 3 : Network settings
Page 9 of 36