User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
Icon LED Status Description
ON When power is supplied to the HomePlug Wireless Adapter.
ON When detected and connected with another HomePlug
Adaptor within the network.
Flicker When the HomePlug Wireless Adapter is transmitting /
receiving data.
Flash When the Wireless LAN is operational.
ON When the Ethernet cable is properly connected from your
HomePlug Wireless Adapter to the Ethernet Card.
Flicker When the Ethernet is transmitting / receiving data.
The Ethernet Port is a 10/100 Base-T Auto-MDI/MDIX (allows either cross or straight cable)
Ethernet jack (RJ-45) to connect to your Ethernet Network card or Ethernet Router/Modem or
Ethernet Hub/Switch.
The Reset button is used to reset the HomePlug Wireless Adapter to its factory defaults.
Page 8 of 36