User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
Select the wireless access point that you want to connect by clicking on the radio button under
Click and then click on Connect AP. You will be prompted for confirmation. Click OK.
Figure 37 : Connect to AP Confirmation
If the wireless access point is WEP enabled, you will be prompted to enter the security WEP in
Hexadecimal format.
Figure 38 : WEP
Once connected to the wireless access point, the ** character will be displayed under the
Selected cloumn. See Figure 39.
Figure 39 : Wireless Client - Connected
Page 31 of 36