User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
5.4.3 AP Mode
The AP Mode allows you to specify the mode settings for the HomePlug Wireless device. The
device can be set to an Access Point, Wireless Client or WDS Mode. By default, it is set to
Access Point.
5.4.3.1 Access Point
Select Access Point and click Apply to take effect the setting.
When set to the Access Point mode, the wireless clients will use the ESSID of the Access Point
for the connection.
Figure 33 : Access Point
Click on the Show Connection Status and all the MAC address of the wireless clients that are
connected to the HomePlug Wireless Access Point will be displayed. See
Figure 34.
Figure 34 : Access Point – Connection Status
Page 29 of 36