User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
5.4 Wireless
This section allows you to configure the Wireless parameters.
5.4.1 Setting
The ESSID is set as “LNX_WILDPASS” by default. It can be changed. ESSID is wireless
network name for the HomePlug Wireless device. Your wireless client will need this name for
wireless connection. See Figure 31.
To disable the HomePlug Wireless Access Point, uncheck the box for the Wlan Radio. This will
prevent the wireless router from emitting any wireless signal.
You can also hide the ESSID by checking the box for SSID Broadcast. The wireless client will
not be able to see your ESSID wireless network name.
Figure 31 : Wireless Settings
Click Apply to take effect the setting.
Page 27 of 36