User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
5.3 HomePlug
The HomePlug section allows you to setup the Local Network Password, Remote Network
Password and Scan the Powerline Network to get the MAC address of all the connected
HomePlugs.
5.3.1 Local
This is used to setup the Network Password of Local Homeplug. See Figure 28.
All HomePlug devices are shipped using “HomePlug” as a Network Password. This page allows
you to change this Network Password and set your own private password then apply it to the
HomePlug device connected to the computer.
The local HomePlug MAC address will be shown.
Figure 28 : Local Network Password
Click Apply to take effect the setting.
NOTE: Your private Local Network Password must have between 1 and 256
characters. The password is case sensitive. The Network Password can
include any letters of the alphabet, numbers or punctuation marks.
Remember the Network Password as it will be needed when adding
other devices to the network later.
Page 24 of 36