User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
5.2 LAN
5.2.1 LAN Settings
The LAN Settings page under the LAN allows you to configure the device’s IP address for the
LAN interface. The default IP Address of the device is 192.168.1.254.
By default, the device request an IP address from a DHCP server.
Figure 27 : ADSL Modulation
Click Apply to take effect the settings.
NOTE: If the Request IP Address from DHCP Server is disabled OR if the
Request IP Address from DHCP Server is enabled but there is no
DHCP Server available, you should have your computers configured in
Fix IP Address mode (refer to “Chapter 3: Configuring Your Ethernet
Network Card” on Page 11 in order to access the web page.
Page 23 of 36