User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
5.1.2 Firmware Upgrade
The HomePlug Wireless software is stored in the FLASH memory and can be upgraded as new
software is released.
Figure 12 : Firmware Upgrade
Click Browse to locate the software file and then click Apply.
You will be prompted to confirm on the continue with the upgrade process.
Figure 13 : Firmware Upgrade Confirmation
NOTE: For the Firmware Upgrade, the configuration data will be set to
default.
Click OK when the below is prompted. Do not turn off the device.
Figure 14 : Firmware Upgrade Warning
Page 16 of 36