User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
NOTE: This is important especially if you have more than one Local Area
Connection icons displayed at the Network and Dial-up Connections /
Network Connections window. Ensure that you have selected the
correct one.)
1. Select Internet Protocol (TCP/IP) and click Properties.
Figure 5 : Local Area Connection properties
2. Select the option Use the following IP address. Enter the IP address as shown in Figure
6 and click OK.
Page 11 of 36
Figure 6 : TCP/IP Properties
3. Click OK again to close.
4. Ensure that your Bridge Modem is powered ON.
5. Restart your system.
6. Proceed to Chapter 4.