User's Manual

85Mbps HomePlug Wireless G Ethernet Adapter – User Guide
4. Click the IP Address tab.
5. Select the option Specify an address. Enter the IP address as shown in Figure 4 and
click OK..
Figure 4 : TCP/IP Properties
6. Ensure that your Bridge Modem is powered ON.
7. Restart your system.
8. Proceed to Chapter 4.
3.2 For Windows
®
2000 / Windows
®
XP
Windows® 2000:
a. From your Windows desktop, right-click on the icon My Network Places and select
Properties.
b. At the Network and Dial-up Connections window, right-click on the Local Area
Connection icon and select Properties.
Windows® XP: (Instructions are based on default Start menu option)
a. From your Windows desktop, click Start > All Programs > Accessories >
Communications > Network Connections.
b. Right-click on the Local Area Connection icon that reflects the model of your
Ethernet Card that is connected to your Bridge Modem and click Properties.
Ensure that the field Connect Using indicates the model of your Ethernet Card that is connected
to your Bridge Modem.
Page 10 of 36