User's Manual

User Manual
Layer 2
Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is
only configurable on the WAN interfaces as VLAN is only supported on the WAN side in
the current software release.
Layer 2
Field Description
Interface Select the WAN interface here to configure the CoS for incoming traffic. Only WAN
interface can be selected as VLAN is currently supported only on the WAN side.
Class of Service The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5,
and CoS6.
User Priority The selections are 0, 1, 2, 3, 4, 5, 6, 7.
To configure Ingress Layer 2:
1. Select Advanced Menu.
2. Select QoS > Ingress.
3. Select the quickstart interface.
4. Select Layer 2.
Page 90 of 118