User's Manual

User Manual
To configure the LAN groupings:
1. Select the Advanced Menu.
2. Select LAN > LAN Configuration.
3. Select ETHERNET in LAN group 1 and then click < Remove. No packets will be sent
to the ETHERNET interface because it does not belong to any LAN group.
4. Select ETHERNET from Interfaces and then click Add > under LAN group 2. Just like
in LAN group 1, Configure will appear in LAN group 2 to allow the definition of
additional configurations.
5. To temporarily activate the settings, click Apply.
6. To make changes permanent, click Save Settings.
Page 44 of 118