User's Manual
Table Of Contents
- Countries of Operation and Conditions of Use in the European Community
- Introduction
- Minimum System Requirements
- ADSL Router Package
- POTS-Splitter1 (optional)
- ADSL Router Overview
- Typical ADSL Router Connections
- Step 1: Connecting the ADSL Router to Your Computer/Notebook
- Checking Your Connections
- Powering On
- Step 2: Configuring Your Ethernet Network Card
- Step 3: Configuring Your Internet Browser
- Step 4: Connecting to the Internet
Easy Start
2.3 For Windows
®
2000 / Windows
®
XP
i Windows® 2000:
a) From your Windows desktop, right-click on the icon My Network Places and
select Properties.
b) At the Network and Dial-up Connections window, right-click on the Local Area
Connection icon and select Properties.
Windows® XP:
(Instructions are based on default Start menu option)
a)
b)
From your Windows desktop, click Start > All Programs > Accessories >
Communications > Network Connections.
Right-click on the Local Area Connection icon that reflects the model of your
Ethernet Card or wireless adapter that is connected to your ADSL Router and click
Properties.
ii Ensure that the field Connect Using indicates the model of your Ethernet Card that is
connected to your ADSL Router.
(This is important especially if you have more than one Local Area Connection icons displayed at the
Network and Dial-up Connections / Network Connections window. Ensure that you have selected the
correct one.)
Select Internet Protocol (TCP/IP) and click Properties.
iii Select the option Obtain an IP address automatically and click OK.
Click OK again to close.
Ensure that your ADSL Router is powered on. Restart your system.
Proceed to Step 3
11 of 13