User's Manual

BLUETOOTH
®
CAR KIT - User Guide
Chapter 3 Using the Bluetooth
®
Car Kit
3.1 Connecting the Car Kit
Connect the Car Kit to the cigar lighter and switch on the car ignition. A blue light at the
Bluetooth
®
logo indicates that your Car Kit is connected.
IMPORTANT: The first time you connect your car kit, you will hear the words
<< Please pair device >>. If this is not the case, reset the system by
holding the red and green buttons down simultaneously for at least 2
seconds. Then proceed to pair your phone to the Car Kit (Please refer
to the chapter concerning your phone model).
Your phone will now automatically connect to the Car Kit whenever it is within a few meters
distance.
To switch off the Car Kit, either cut the ignition or unplug the Car Kit from the cigar lighter.
3.2 Using the Car Kit with your mobile phone
Before using the Car Kit for the first time, you must pair it with your phone. Each Car Kit can
pair up to 5 phones at one time. Additional functions are available depending on your mobile
phone model.
Please proceed to the appropriate chapter: -
•
Chapter 4 - For Nokia Phones 6310, 6310i, 8910, 6650, 7600, 3650, 3600, 6600,
and N-Gage.
• Chapter 5 – For Philips Phones Fisio 820 and 825.
•
Chapter 6 – For Siemens Phones S55 and S56.
•
Chapter 7 – For Ericsson Phones R520m, T39, T39m, T68, T68m and Sony Ericsson
phones T68i, T610, T616, T618, Z600, and Z608.
• Chapter 8 – For Sony Ericsson Phones P800 and 900.
•
Chapter 9 – For Panasonic Phones X70.
•
Chapter 10 – Motorola V3
•
Chapter 11 – O
2
Mini Xda
• Chapter 12 – Samsung SGH-E530 & SGH-E730
Page 7 of 37