User's Manual

BLUETOOTH
®
CAR KIT - User Guide
Page 33 of 37
Chapter 11 O
2
Xda Mini
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
11.1 Activating the Bluetooth
®
You must activate the Bluetooth
®
feature of your phone to establish a Bluetooth
®
connection
between your Pocket PC device and other Bluetooth
®
devices.
• Tap the Bluetooth
®
Icon in the Bottom Right hand corner of the main screen.
• Select Turn on Bluetooth
®
. (Do not select Make this device discoverable)
• Tap OK.
11.2 Pairing to the Hand Phone
• Turn off the CAR KIT and wait for about 4 seconds.
• Tap the Bluetooth
®
Icon in the Bottom Right hand corner of the main screen.
• Tap “Devices”… Tap “New”. Your phone now searches for Bluetooth
®
devices and will
display them in the list.
• Tap the name of the device, “V.3.18” and then Tap “Next”.
• Tap the ‘123’ to bring up the number entry keypad.
• Enter “1234” as the Passkey and then tap “Done”.
• Enter a “Display Name” and Press “Done”. Note: In Name, you may or may not edit the
name of your bonded device).
11.3 Answering/Receiving a Call
When the phone is receiving a call on the CAR KIT.
• To receive a call, press the “Answer Key” once and audio will be hear from the speaker
• To switch calls while currently receiving a call, press the “Answer Key” button again.
To switch back to the other caller, press the “Answer Key” button again.
• To terminate the call, press down the Off Hook Button.