User's Manual

Table Of Contents
BLUETOOTH
®
CAR KIT - User Guide
Chapter 8 For Sony Ericsson Phones (P800 and P900)
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
8.1 Pairing
Check that the blue light on top of the Car Kit is ON. You should hear « Please pair device »
instruction for the first time. If not, reset your Car Kit by pressing the green and the red buttons
simultaneously for at least 2 seconds, and wait for « Please pair device » instruction.
Apply t he follow ing pr ocedure for Sony Ericsson P8 0 0 a nd P9 0 0 .
Open the flip on your phone and select the “Application” icon in the toolbar.
Select “Settings” and press “Add” (searching).
Select “Bluetooth
®”
and press “Add”. Please wait during the search.
Select “V3.18” and wait during the connection.
Enter 1234 and click on “Ok”.
V3.18 will be displayed in the list of Bluetooth
®
Devices.
Select “Done”.
NOTE: When pairing is comleted, wait for the beep before making any calls.
8.2 Voice Tags
You can use your phone to assign voice tags to the names in your phonebook. The Car Kit
allows you to use these voice tags to call your contacts. Just press the green button on the Car Kit
control unit and say the name of your contact after the beep.
Correct recording of the voice tags is very important. The reliability of the voice dialing system
depends of the standard of the recording. To obtain optimum operation, please, comply with
these recommendations:
Speak out clearly and naturally.
Make the recording in quiet place.
Turn off your engine, radio and ventilation.
Close the doors and windows.
Page 26 of 37