User's Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- 1.2 Controls
- Chapter 2 Installation and Operation
- Chapter 3 Using the Bluetooth® Car Kit
- Chapter 4 For Nokia Phones
- Chapter 5 For Philips Phones
- Chapter 6 For Siemens Phones
- Chapter 7 For Ericsson and Sony Ericsson Phones
- Chapter 8 For Sony Ericsson Phones (P800 and P900)
- Chapter 9 For Panasonic Phones
- Chapter 10 Motorola V3
- Chapter 11 O2 Xda Mini
- Chapter 12 Samsung Phones
- Chapter 13 Care and Maintenance
BLUETOOTH
®
CAR KIT - User Guide
Page 10 of 37
Chapter 4 For Nokia Phones
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
4.1 Pairing
Check that the blue light on top of the Car Kit is ON. You should hear « Please pair device »
instruction for the first time. If not, reset your Car Kit by pressing the green and the red buttons
simultaneously for at least 2 seconds, and wait for « Please pair device » instruction.
Apply t he follow ing procedur e for N ok ia 6 3 1 0 , 6 3 1 0 i, 8 9 1 0 , 6 6 5 0
and 7 6 0 0 .
• In the Menu, select “Bluetooth
®”
and press “Select”. Select “On” to activate
Bluetooth
®
.
• Go to “Search for Audio Accessories” and press “Select”.
• “Searching for devices” is displayed. Please wait.
• “V3.18” is displayed. Press “Select” to connect.
• “Enter Passkey” appears. Enter 1234 and then press “Select”.
Apply t he follow ing procedur e for N ok ia 3 6 5 0 , 3 6 0 0 , N - Gage a nd
6 6 0 0 .
• In the Menu, select “Connect” or “Tools” icon then the “Bluetooth
®
”.
• Check that the Bluetooth
®
is ON, select “Paired Devices” press “Options”.
• Select “New Paired Device”. The phone is searching.
• Select “Stop” and then select “V 3.18.”. Please wait.
• Enter 1234 for Password and press “OK”.
• After the beep press, “Yes” to accept the connection request.