User manual

User Manual
Page 60 of 64
USB Device
The USB port on the DSL1015EN is capable of sharing the contents of your USB storage
device to the network. The following steps should be accomplished to share your files on
the network.
1. Ensure that the DSL1015EN is OFF, connect the USB storage device and switch
it ON.
2. Once the DSL1015EN is ready, you can access the files from your windows
explorer, this can be done by clicking on the Start Button> Run.
3. On the Open box, type: \\192.168.1.1
and click on OK. If there is a prompt for
a username and password, type admin for both the username and password.
4. From windows explorer, you will see a folder called sda1, this is the folder
containing the files from your USB storage device.