User manual

User Manual
Page 36 of 64
Access Control Services
Select which Services to allow and whether to allow from the LAN or the WAN.
Print Server
The DSL1015EN is equipped with a USB Host print server on board. To use the print server
on the DSL1015EN, you need to accomplish the following tasks:
1. Install the printer drivers on the computer
2. Enable the DSL1015EN for Print Server
3. Add a network printer
INSTALL THE PRINTER DRIVERS
Printers using the USB port come with a software installation CD for installing the
printer drivers and applications. The drivers for the printers must be installed on the
computer first to prepare it to use the printer when it’s connected to the DSL1015EN.
Refer to the printer’s documentation on how to install the drivers.
ENABLE THE PRINT SERVER APPLICATION
1. Open you Internet browser and log on to http://192.168.1.1
, on the
authentication page, type admin for both the username and password.