User manual

U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
7. The WEP Configuration screen will be shown.
8. Select Hexadecimal (Hex) if you are using hexadecimal numbers (0-9, or A-F).
10 Hexadecimal digits are needed if 64-bit WEP is used;
26 Hexadecimal digits are needed if 128-bit WEP is used;
58 Hexadecimal digits are needed if 256-bit WEP is used.
For example, the characters “1122aabbcc” are in 10 Hexadecimal digits.
9. Select ASCII if you are using ASCII characters (case-sensitive). ASCII characters are:
0,1,2,...8,9 and a,b,c,d,...x,y,z.
5 ASCII characters are needed if 64-bit WEP is used;
13 ASCII characters are needed if 128-bit WEP is used;
29 ASCII characters are needed if 256-bit WEP is used.
For example, the characters “test1” are 5 ASCII keys.
10. Click to exit the .
OK WEP Configuration
11. Click OK to exit
the Profile Configuration and then click on Apply in the Main tab to
activate the settings.
© Copyright December 2005. All Rights Reserved.
P
P
a
a
g
g
e
e
2
2
2
2
o
o
f
f
2
2
2
2