Operating instructions

Aztec ADS430 | Optical dissolved oxygen probe | OI/ADS430–EN Rev. A 19
9 Spares and accessories
9.1 Spares
9.2 Accessories
*See Section 3.5, page 6.
Acknowledgements
RDO is a registered copyright of In-Situ Inc.
Part number Description
ADS430203 ABB RDO probe O-ring replacement kit
ADS430204 ABB RDO probe sensor cap replacement kit
ADS430205 ABB RDO probe calibration kit
ADS430212 Nose replacement kit
AWT4009010 1 m (3.2 ft.) extension cable
AWT4009050 5 m (16.4 ft.) extension cable
AWT4009100 10 m (32 ft.) extension cable
AWT4009150 15 m (49.2 ft.) extension cable
AWT4009250 25 m (82 ft.) extension cable
AWT4009500 50 m (164 ft.) extension cable
Table 9.1 Spares
Part number Description
ADS430125* Handrail mounting bracket for 42 mm (1.7 in.) dia handrail –
dip or floating ball systems
ADS430128* Handrail mounting bracket for 50 mm (2.0 in.) dia handrail –
dip or floating ball systems
ADS430130* Swivel and tilt action handrail mounting bracket for 42 mm
(1.7 in.) dia. handrail – floating ball systems only
ADS430135* Swivel and tilt action handrail mounting bracket for 50 mm
(2.0 in.) dia. handrail – floating ball systems only
ADS430145 ADS430 chain mounting adaptor with 3 m (9.8 ft.) chain
ADS430144 Stainless steel chain (extension) – 10 m (32.8 ft.)
ADS430050*
ADS430051*
EZCLEAN compressor unit:
–230 V AC
–115 V AC
ADS430057
ADS430058
EZCLEAN upgrade kit; includes EZCLEAN compressor unit,
air-blast adaptor assembly, pneumatic tubing, spring clips
for dip pole and floating ball boom:
–230 V AC
–115 V AC
Table 9.2 Accessories