Operating instructions

10 OI/ADS430–EN Rev. A | Aztec ADS430 | Optical dissolved oxygen probe
Salinity Correction Required when monitoring water containing high quantities of
dissolved salts. Enter the required value between 0 and 42 Practical
Salinity Units (PSU). Leave at the default value of 0 PSU if salinity
correction is not required.
0 PSU
Barometric Pressure Barometric pressure compensation. Set the local barometric
pressure to 506 – 1114 mbar (380 – 835 mm/Hg). If the barometric
pressure is unknown, leave at the default sea-level value of 1013
mbar (760 mm/Hg).
1013 mbar
Restore Defaults Select to reset all Sensor Setup parameters to their default values.
Salinity Units Select the required salinity units:
PSU (Practical Salinity Units) or ppt (parts-per-thousand)
PSU
Pressure Units Select the required barometric pressure units:
mBar / mmHg
mBar
Menu Comment Default