User Manual

EYE SENSOR SYSTEM

To turn off the eye sensor system, press top button once and display will

change from (EYES ON) to (EYES OFF).

To turn on the eye sensor system, press top button once and the indicator

will change back to (EYES ON).

A flashing indicates an Eye error. This is caused by debris blocking the eyes,

broken paint covering the eyes, and/or the bolt is in the forward position (Please

read the troubleshooting section for solution).

EYES ON

BALL DETECTED

EYES OFFEYES ON

NONE DETECTED

BATTERY INSTALLATION

ZII is compatible wirh 9 or 9.5 Volt Alkaline batteries.

For best performance, please use named brand

9 or 9.5V battery.

1. Remove the Three Grip Panel Screws (S016) from the

left side of grip panel (Fig 2A).

2. Attach the battery to the battery harness (Fig 2B).

3. Re-tighten the Three Grip Panel Screws (S016). (Fig 2C)

Note: Allen Wrench (2.5 mm) is provided in the

Spare Parts Kit.

Fig 2A

Fig 2B

Fig 2C

ZEN OLED SOCKETS

1. Battery socket

2. Solenoid socket

3. Micro switch socket

4. Eye sensor system socket

5. Expansion board socket