User Manual

ManualsBrandsAzodin ManualsPaintballKD-II

! WARNING !

IMPORTANT SAFETY INSTRUCTION AND GUIDELINES

• This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death.

• It is recommended that a person be 18 years or older to purchase this product.

Person under the age of 18 must have adult supervision or consent.

• Please read the manual and follow the instructions for using this product.

• Eye and face protection specially designed for paintball, must be worn by users

and persons within range at all times.

• Never look down the barrel or breech area of a marker.

• Always use barrel blocking device when the marker is not in use.

• Always chronograph this marker before playing paintball.

• Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or

• Always chronograph the marker before playing.

tanks.

• Do not shoot at people, animals, houses, cars or objects that are not related to the sport

of paintball.

• Always keep the marker in Safe mode until ready for use.

• Only use 0.68 caliber paintballs with this marker.

• Always make sure the bolt is in the un-cocked position when marker is not in use.

liabilities from Azodin.

• This owner’s manual should always accompany this marker for reference and should

be presented to the new owner if there is transfer of ownership.

will void all warranties and

! WARNING !

IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES

• All tanks must be retested before the expiration date.

property damage.

• Do not over pressurize. Do not expose pressurized tanks to temperatures in excess

of 130F° degrees (54°C).

• Do not expose tanks to corrosive materials and do not clean with caustic cleaners.

• Do not alter tanks in any way.

• Tanks heated up to a temperature of 250F° degrees (54°C) or more must be

• Keep air tanks out of reach of children.

• The Regulator should NEVER detach from the tank canister. Should this occur, seek

• Air tanks are to be used for the sport of paintball.

• Tank Regulators must be installed or removed by qualified personnel.

death if the regulator unscrews from the tank head.

When removing the tank from the marker, please check to see if the regulator is

unscrewing from the tank and staying on the On/Off ASA. If the two pieces are separating

contact a qualified airsmith for further assistance.

The regulator should unscrew from the marker’s On/Off ASA (A091) when the tank is turned.

Both the regulator and tank should disconnect from the marker at the same time.

HPA / N2 Air tanks have enough force to become a projectile and cause serious injury or

Summary of content (7 pages)

PAGE 1
! WARNING ! ! WARNING ! IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES IMPORTANT SAFETY INSTRUCTION AND GUIDELINES • This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death. • Tank Regulators must be installed or removed by qualified personnel. • It is recommended that a person be 18 years or older to purchase this product. • All tanks must be retested before the expiration date. Person under the age of 18 must have adult supervision or consent.
PAGE 2
GETTING STARTED VELOCITY ADJUSTMENT COUNTERCLOCKWISE DECREASE VELOCITY 1. First, place the BARREL BLOCKING DEVICE over the barrel. 2. Always point your marker at a “SAFE” direction before use. To use, push the safety button from the “PUSH SAFE” side of the grip frame. Doing this will put the marker in a lock safe mode. To unlock the safe mode, point the marker in the safe direction, and push the safety button towards the “PUSH SAFE” side of the grip frame. CLOCKWISE INCREASE VELOCITY 3.
PAGE 3
ZeRO-D SYSTEM The ZeRO-D is a revolutionary system that combines the Feather Striker and Mass Flow Valve to achieve a low operating pressure. This gives the KD-II an unparalled shooting profile for a Stacked Tube Blow Back (STBB) Marker.
PAGE 4
REASSEMBLE REAR INTERNALS TROUBLESHOOTING WARNING: Always remove loader, air tank, and all paintballs from the marker before disassembly. 1. Insert the Feather Striker (P021) thru the rear of the receiver with the O-Ring facing towards the front of the marker and with the hole on the Feather Striker facing upright. While inserting the Feather Striker, apply pressure behind the Feather Striker and at the same time pull the Trigger to let Feather Striker enter the rear chamber of the receiver. 2.
PAGE 5
KD-II PART LIST KD-II SCREW CHART SIZE: 1:1 PART NUMBER AND NAME M5 X 10L MAIN BODY SCREW M8 X 8L VALVE RETAINING SCREW M4 X 8L GRIP PANEL SCREW M5 X 12L VERTICAL ASA SCREW M5 X 14L CLAMP SCREW M3 X 3.
PAGE 6
ZeRO-D SYSTEM EXPLODED VIEW INLINE REGULATOR EXPLODED VIEW Z087 R015 REGULATOR PARTS LIST ZeRO-D PARTS LIST Z031 Z014 NO PART NAME PH11 Z087 HP VALVE ZeRO-D C CLIP S031 P081 R031 P084 Z013 Z041 Z021 R015 Z012 Z011 Z012 Z013 Z014 ZeRO-D CUP SEAL STEM ZeRO-D CUP SEAL ZeRO-D SPRING GUIDE ZeRO-D SPRING R012 R015 Z021 FRONT VALVE O-RING (CLEAR) AZ O-RING ZeRO-D CUP SEAL O-RING Z031 ZeRO-D ADJUSTMENT SCREW P085 PZ82 R032 P064 R032 R033 P083 Z041 ZeRO-D HOUSING R012 P086 PH11 P064
PAGE 7
KD-II EXPLODED VIEW PZ51 P032 M3 x 3.5L P041 P031 A211 R016 AKD R016 A221 Z001 PH11 R011 R015 A031 M5 X 12L R015 P031 M8 x 8L P032 P021 M3 x 3.