User Manual

Do not shoot at people, animals, houses, cars, or anything not
Fire only 0.68 caliber paintballs or reballs with this marker.
the marker is not in use.
Any modifications or tampering of original factory parts will
at all times, including resale.
void all warranties and liabilities from Azodin Paintball.
Follow the instructions in this manual on how to use this product.
Eye and face protection specifically designed for paintball use,
Never shoot any marker at velocities exceeding 300 FPS (Feet
Per Second), or velocities greater than local fields or
!WARNING!
IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
• Tank valves must be installed or removed by a qualied personnel.
• All tanks must be retested before their expiration date.
• Improper use, lling, storage of the air tank may cause death,
serious injury and property damage.
• Air tanks must be lled only by properly trained personnel.
• Do not over pressurize. Do not expose pressurized tanks to
temperatures in excess of 130F° degrees (54°C).
• Do not expose tanks to corrosive materials and do not clean with
caustic cleaners.
• Do not alter tanks in any way.
• Tanks heated up to a temperature of 250F° degrees (120°C) or
more must be condemned or re-qualied.
• Keep air tanks out of reach of children.
• The valve should NEVER detach from the tank canister. Should
this occur, seek assistance from a qualied airsmith immediately.
• Air tanks are used for the sport of paintball only.
CO2 or HPA/ N2 Air tanks have enough force to y off and cause serious
injury or death if the valve unscrews from the tank head.
Look at the valve when removing the tank from the marker’s Bottom ASA
(A021). Make sure that the valve is turning with the tank.
STOP IMMEDIATELY if the valve starts to unscrew from the tank.
Screw the tank back onto the marker’s Bottom ASA adapter and
contact a qualied airsmith for further counterclockwise.
VA01
(KBA2).
Always point your marker in a “SAFE” direction when not in play.
The Safety is ON when it protrudes out on the right hand side of the
grip frame. Point the marker in the safe direction before unlocking it.
To disengage the Safety, push the Safety Button so it protrudes
out on the left side of the grip frame.
Tighten the air tank clockwise all the way into the
marker’s bottom ASA until it stops.
Attach a paintball hopper/ loader into the marker’s feedneck.
Remove the barrel blocking device and disengage the safe mode.
CAUTION: Never use any hand tools to screw the air tank
fire a paintball. Only test your marker in a safe direction
or on the paintball field.
into the bottom ASA.
7. Unscrew the CO2/ HPA/ N2 air tanks from the marker’s bottom
ASA.
8. After playing, empty out all the paintballs from the hopper. Then
detach the hopper from the marker.
CAUTION: There may be 1-2 paintballs in the breach area;
To remove the paintballs you can turn the marker upside down
or fire it into a safe area.
9. Place the barrel blocking device over the barrel and reengage
the safe mode by pushing the safety button to the right side.
10. Store the marker in a paintball gear bag or in a dry safe place.