User's Manual

®
15
RECOCKING ISSUES
Need Lubrication on the Striker O-Ring (R011).
Striker O-Ring is damaged or missing. Replace a correct O-Ring.
The pressure in the tank is too low and needed to be refilled.
Dirt or broken paintball shell fragments in the receiver. Check,
cleaning, and disassemble rear internals.
AIR LEAKS
Air leaking from the low pressure chamber. Check AZ O-Ring
(R015), replace or need to be oiled.
Air leaking from under the barrel is normally caused by worn or
damaged ZeRO Cup Seal (R013). Check the guide for removal of Cup
Seal / Valve Body.
A scratch on the Valve Body will cause air leak.
Air leaking from the receiver and throughout the Grip frame. Check
Valve O-Rings and replace.
TROUBLESHOOTING
WARNING: Always remove all paintballs, loader and air tank
before disassembling the marker.