User Manual

TROUBLESHOOTING
WARNING: Always remove all paintballs, loader and air tank
before disassembling the marker.
RECOCKING ISSUES
Need Lubrication on the Striker O-Ring (R011).
Striker O-Ring is damaged or missing. Replace a correct O-Ring.
The pressure in the tank is too low and needed to be relled.
Dirt or broken paintball shell fragments in the receiver. Check,
cleaning, and disassemble rear internals.
AIR LEAKS
Air leaking from the low pressure chamber. Check Front Valve O-Ring
(R012), replace and apply 1-2 drops of paintball gun oil at this O-Ring.
Air leaking from under the barrel is normally caused by worn or
damaged cup seal (Z012). Check the guide for removal of Cup
Seal / Valve Body.
A scratch on the Valve Body will cause air leak.
Air leaking from the receiver and the Grip frame. Check
Valve O-Rings and replace.
KAOS-D SCREW
CHART SIZE: 1:1
PART NUMBER AND NAME
S011 M5 X 10L
MAIN BODY SCREW
S012 M8 X 8L
VALVE RETAINING SCREW
S015 M3 X 3L
DETENT COVER SCREW
S016 M4 X 8L
GRIP PANEL SCREW
S017 M5 X 14L
VERTICAL ASA SCREW
S031 M4 X 4L
RETAINING SCREW
S032 M12 X 8L
REGULATOR ADJUSTMENT
SCREW
S091
ON/OFF BOTTOM ASA
RETAINING SCREW
S092 1/8-27 NPT
ON/OFF BOTTOM ASA
HOSE PLUG
S093 M5 X 12L
ON/OFF BOTTOM ASA SCREW
Z031
ZeRO ADJUSTMENT SCREW
KAOS-D O-RING
CHART SIZE: 1:1
PART NUMBER AND NAME
R011
STRIKER O-RING
(RED)
R012
FRONT VALVE O-RING
(CLEAR)
R013
VELOCITY ADJUSTER O-RING
(BLACK)
R015
AZ O-RING
(BLACK)
R016
BARREL O-RING
(BLACK)
R017
END CAP O-RING
(BLACK)
R031
REGULATOR PISTON O-RING
(CLEAR)
R032
REGULATOR SWIVEL
MONUT O-RING (BLACK)
R033
INNER O-RING
(CLEAR)
R034
REGULATOR SEAL O-RONG
(CLEAR)
Z021
ZeRO CUP SEAL O-RING
(CLEAR)