Installation Instructions

FENCE POST

LATCH

ASSEMBLY

FIG 3

GATE

STRIKER

ROD

FIG 4

STEP-1

After installation, TEST the

locking and unlocking of the latch.

After installing the latch assembly, position and

attach the Striker Rod to the gate. With the gate

closed, position the striker with the Striker Rod

secured in the latch assembly (FIG 4), and mark

center points for mountingholes. Drill appropriate

pilot holes and attach striker rod.

STEP-3

STEP-2

Locate the desired mounting height for the

latch on the fence post, mark the centerpoints

of the the 2 mounting holes, and drill appropriate

pilot holes for mounting screws. Realign latch

and attach to post with the supplied lag screws

(FIG 3).