Product Overview

P.O. Box 53138, 10 Royal Orchard Blvd., Thornhill, Ontario, Canada L3T 7R9
Ph: 905-223-5567 Fax: [phone] Email: [e-mail]
AZEL
TECHNOLOGIES INC.
For more product information, please contact:
DIGITAL TEMPERATURE GAUGE: DS-60P
This microprocessor-based, Digital Temperature gauge DS-60P represents the “next generation” in
temperature gauge industries. The bold, hi-contrast LCD display ensures accurate temperature reading to the
tenth degree and can be easily read from greater distances than the conventional mechanical temperature gauge.
DS-60P replaces two mechanical temperature gauges as it can simultaneously display the accurate
temperature of supply and return piping on a hydronic heating system. In addition, the solid state temperature
sensor probe can be extended up to several hundred feet. The unit is designed to be powered by 24VAC input or by
lithium battery. When 24VAC is supplied, the lithium battery works as backup power to enable the unit to continue
operating in case of power failure. Other features include Min/Max memory which shows the highest and lowest
temperature after the last reset and instant Fahrenheit to Centigrade conversion. DS-60P is also ideal for any
application that requires quick and accurate response to temperature change, an easy to read display and a wide
temperature range.
The D-135 series thermostat is a stand-alone microprocessor based thermostat with
large LCD display that takes the guess work out of reading the temperature and maintains
highly accurate temperature control without the programming hassle.
The thermostat is designed to control room temperature by way of on/off controlling the
heating (and cooling) equipments. The setpoint is displayed and can be changed easily by
pressing up or down arrow button.
This simple to use accurate thermostat will replace most round, square or rectangular
thermostats. D-135 series is environmentally safe, mercury-free which requires no leveling,
so there’s no hassle, and no special disposal requirements.
DIGITAL NON-PROGRAMMABLE THERMOSTATS
D-135ES
D-135E
D-138 ADDITIONAL FEATURES:
Unique
±3
§ “spinning-switch”
dial allows instant setpoint
change of °F as quick
as a flash.
§ Fan Switch
§ Heat/Cool/Off Switch
§ EEPROM for Setting
Backup
D-138
RF-22
D-500/D502F
Azel Technologies introduces 500 series electronic programmable thermostat that utilizes the latest digital
technologies for residential and light commercial systems. D-500 is designed
he large and easy to read LCD
display with backlit makes the thermostat easy to operate and simple to program.
for 24 Vac single-stage heating
and cooling systems. D-502F is designed to control the floor temperature in Radiant Floor Heating Systems. It
comes with a 10-ft floor sensor probe.
The 500 series can accurately control the temperature within one degree. Reliable permanent memory
retains the programmed settings in the event of a power failure. In addition, t
The 500 series programmable thermostat delivers maximum comfort and energy savings by automatically
changing to the preset temperature for various times of the day. The energy use and costs can be reduced
according to the program heat and cool times as much as 33%. This programmable thermostat is better for the
environment, since using less energy helps reduce greenhouse gas emissions associated with energy
production.
FEATURES:
§ Deluxe standard Heat Only
§ Reliable Digital Electronic Accuracy
§ Contains NO Mercury, environmentally safe
§ Accurate Universal Replacement
§ No Leveling Required
§ Low Voltage (24 VAC) Systems or battery
operated
§ Only 2 wires needed to power thermostat, no
need to change battery in the future
DIGITAL NON-PROGRAMMABLE RADIANT FLOOR HEATING THERMOSTAT
DIGITAL PROGRAMMABLE THERMOSTATS:
www.azeltec.com
Catalog #: DS6005
D500 FOR HEATING & COOLING D502F FOR RADIANT FLOOR HEATING
D-508F digital non-programmable heat only thermostat is designed to control either ambient(air) temperature (A
Mode) or floor temperature (F Mode) or a combination of ambient temperature with floor temperature limits(AF
Mode). An auxiliary remote sensor is provided to measure slab temperature in order to control the floor
temperature(within maximum and minimum limits in AF Mode). It can also be used for sensing the outdoor
temperature in A Mode.