Brochure

FEATURES:
SPECIFICATIONS:
.Dual Large LCD (Liquid Crystal Display) to show
supply and return temperature
.Min/Max memory can be selected for both
OUT(Supply) and IN (Return) water temperature
since the last time RESET button was pressed
.Celsius or Fahrenheit switch on the front unit
.Dual power input: 24VAC or Lithium Battery
.Frequent sample rate dictates any change in
temperature instantly
.Easy installation
.Temperature range: -58 to 302 F (-50 to 150 C)
.Resolution: 0.1 F(0.1 C)
.Accuracy: ±1 C / ±2 F
.Sample rate: 3 Secs.
.Input: 2 x 10K ohm thermistor probe model: P-03
(designed to strap on a pipe or insert into a
temperature well)
.Operating Voltage: 24VAC or Lithium Battery
(included, last for over 3 years)
.Size: 3.5” x 2.0” x 0.9” (88.9mm x 50.8mm x
22.86mm)
.Enclosure: Flame-retardant plastic
.Operating Temperature: 32 to 122 F(0 to 50 C)
.Weight: 0.11lbs (50g)
° °
° °
° °
° °
DIGIT-STAT DS-60P DIGITAL TEMPERATURE GAUGE
FOR HYDRONIC HEATING/GEOTHERMAL/SOLAR HEATING APPLICATIONS
The microprocessor-based, AZEL Technologies
Digital Temperature gauge DS-60P represents the “next
generation” in temperature gauge industries. The bold, hi-
contrast LCD display ensures accurate temperature reading to
the tenth degree and can be easily read from greater distances
than the conventional mechanical temperature gauge.
DS-60P replaces two mechanical temperature
gauges as it can simultaneously display the accurate
temperature of two locations such as the supply and return
piping on a hydronic heating system. In addition, the solid state
temperature sensor probe can be extended up to several
hundred feet. The unit is designed to be powered by 24VAC
input or by lithium battery. When 24VAC is supplied, the lithium
battery enables the unit to work in case of power failure. Other
features include Min/Max memory which shows the highest
and lowest temperature after the last reset and instant
Fahrenheit to Centigrade conversion. DS-60P is also ideal for
any applications that requires quick and accurate response to
temperature change, an easy to read display and a wide
temperature range(eg. Geothermal or Solar Heating
Applications).
SPECIFICATIONS:
.Sheath: Copper
.Lead: 10” of 20 AWG heat resistence wire
.Dimension: 3/8" OD x 13/16" length (9.5mm OD x
20.6mm)
.Operating range: --58 to 302 F (-50 to 150 C)
.Senor: 10K ohm @ 77 F (25 C ± 1%) thermistor
.Weight: 0.02lb (10g)
° °
° °
DS-60 (Actual size)
UNIVERSAL SENSOR PROBE
(THERMISTOR) Model: P-03
The Azel Sensor Probe is engineered to ensure long life and rapid
response. It is designed to strap on a pipe or insert into a
temperature well. P-03 is specially designed for use with DS-60
and other controls that require 10K ohm thermistors.
P.O. Box 53138
10 Royal Orchard Blvd.
Thornhill, Ontario, Canada L3T 7R9
Ph: 905-223-5567 Fax: [phone]
Email: [e-mail]
www.azeltec.com
AZEL
TECHNOLOGIES INC.
MODEL DESCRIPTION
DS-60 Digital temperature gauge
P-03 Universal sensor probe
DS-60P Digital temperature gauge with two
univeral sensor probes (DS-60 and P-03)