Product Overview

FEATURES:
§ Large LCD with backlighting for displaying
Setpoint & Floor Temperature or Room
Temperature
§ Slab Temperature Control for Radiant Floor
Heating Systems
§ Low Voltage (24 VAC) System
§ Reliable Digital Electronic Accuracy
§ No Leveling Required
§ Contains NO Mercury, environmentally safe
§ Only 2 wires needed to power thermostat,
no need to change battery in the future
§ Selectable display in °F or °C
§ EEPROM for setting backup
§ ON/OFF switch to shut off relay output
§ Supplied with 10ft. floor sensor
§ Built-in Digital Control System
AZEL AZEL
TECHNOLOGIES INC.TECHNOLOGIES INC.
P.O. Box 53138
10 Royal Orchard Blvd.
Thornhill, Ontario, Canada L3T 7R9
Ph: 905-223-5567 Fax: [phone]
Email: [e-mail]
SPECIFICATIONS:
§ Display Format: Liquid Crystal Display(LCD) with
Backlighting
§ Floor Temperature Control Range: 41-113°F(5-45°C)
§ Temperature Display Range: 32-140°F(0-60°C)
§ Contact Rating: 16A
§ Power Supply: 24 Vac, 50-60Hz
§ Sampling Rate: 1 Minute
§ Accuracy: 1°F
§ Switching Differential: 0.5/1.0/1.5/2.0 °F/°C
§ Dimension: 91.5 x 80.3 x 30 mm
§ °
±
Resolution: 0.1 F
D-26F digital thermostat is specifically
designed for Radiant Floor Heating Systems. It is very
simple to install and operate without any programming
steps. A 10 ft. auxiliary remote sensor is provided to
measure and control the slab temperature. In addition,
an ON/OFF switch can be used to turn off the relay
output. Setpoint and floor temperature or room
temperature is displayed on the LCD screen with
backlit.
Non-Programmable Radiant Floor Digital Thermostat
D-26F
±
1°
F
A
CCURA
CY
Flo
r Sen
so
r o
In lud d
c e
Flo
r Sen
so
r o
In lud d
c e
Ey
as
LView
arge
laDisp y
A simple, reliable and effective
way to sense and control floor
temperature
L
N
1
2
S
24 Vac
S
LOAD
Floor Sensor
WIRING DIAGRAM:
SW
Max. 16A
For more product information, please visit:
www.azeltec.com
MODEL DESCRIPTION
D-26FS Radiant Floor thermostat with ON/OFF
switch
D-26F
D-26FS