QLINK – User Manual Stereo Audio Transmitter
ClearSounds® QLINK Bluetooth Stereo Transmitter Contents Before use…………………………………………………….1 1. About the QLINK .…..…………………………………………… 1 2. Overview ……………………………………………….………….2 1. 2. 3. 4. 5. 6. 7. Getting started………………………………………………. 1 Parts Checklist ……………………………………………………. 1 Charging the QLINK ……………………………….…………… 2 Attaching the QLINK ………………………………………………2 Switching the QLINK on/off …………………...……...…………3 Pairing with Bluetooth devices …………………………………… 3 Re-connecting to a Bluetooth device…..…………………………...
Before use 1. About the QLINK The QLINK is a Bluetooth stereo transmitter. The music from your MP3, PC and other devices can be transmitted wirelessly to your Bluetooth stereo receiver with it. The QLINK has built-in rechargeable battery and can be used for 9-10 hours on a fully charged battery. You can safely leave the power supply plugged into the QLINK at all times so there is no need to re-charge. 2. Overview 1 2 3 4 Multi-function button (MFB) Charging jack LED indicator 3.
2. Charging the QLINK The QLINK comes with a built-in rechargeable battery. Before using it for the first time, it is recommended to charge the battery fully. When the QLINK is low on power, the red LED will flash. This will be the time to recharge the battery. Connect the charger to a standard power outlet and the charger connector to the charging jack of the QLINK. The Red LED will be on during charging. It takes about 3 hours to charge the battery fully.
1. Connect the red and white connectors of the RCA cable to the red and white jacks on the TV or primary device. 2. Connect the 3.5mm plug of the QLINK into the black 3.5mm jack on the RCA cable. Attaching to your MP3 player or other Sound Output Device Plug the 3.5mm plug into the 3.5mm Headset Jack on your audio device. The QLINK is designed to be used with STEREO devices. If you are attaching the QLINK to a mono audio device, you must use a 3.5mm mono-to-stereo adapter. 4.
Notes: The pairing mode will last 1 minute, the QLINK will enter standby mode if no devices can be connected within 1 minute. The QLINK can remember 8 paired devices. When the number of paired devices exceeds 8, the first one will be replaced. The QLINK can pair with a Bluetooth stereo receiver whose PIN NO. is ‘0000’, ‘1234’, ‘1111’, or ‘8888’. 6. Reconnecting to a Bluetooth device 1) Automatic connection Every time the QLINK is turned on, it will automatically connect to the last connected device.
Care and maintenance Before using the QLINK, please read the following recommendations, it will help you to enjoy the product for many years. Do not expose the product to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Do not expose the product to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don’t use abrasive cleaning solvents to clean the product.
Specifications Bluetooth version Bluetooth profile Frequency range Effective range Charging input voltage Working time Charging time Dimensions Weight Bluetooth V2.1 A2DP 2.4GHZ-2.4835GHZ 30 feet DC 5V Up to 10 hours About 3 hours 1.8×1.3×.3 inches .5 oz Notes: 1. This device complies with Part 15 of the FCC Rules.
