PRO-XD DIGITAL WIRELESS MICROPHONE SYSTEM OPERATION MANUAL
SAFETY CAUTION WARNING: DO NOT ATTEMPT TO OPEN THE CASING OR MAKE ANY MODIFICATION TO THE INTERNAL ELECTRICAL COMPONENTS. ELECTRIC SHOCK OR INJURY MAY RESULT. WARNING: ANY UNAUTHORIZED MODIFICATION TO THIS PRODUCT WILL VOID ANY APPLICABLE WARRANTIES. WARNING: DO NOT STORE OR OPERATE THIS PRODUCT NEAR A HEAT SOURCE OR IN AN ENVIRONMENT OF EXTREME TEMPERATURES. AVOID EXPOSURE TO RAIN OR ANY OTHER SOURCE OF MOISTURE. DO NOT SUBMERGE IN WATER. IF EXTERIOR IS EXPOSED TO WATER, WIPE DRY BEFORE USE.
PRO-XDT Transmitter Parts And Functions 1 ① Antenna ② Power & Sync Button ③ Input Selector ④ Aux Input ⑤ Belt Clip 5 ⑥ Reset 3 ⑦ Power Indicator ⑧ Signal Indicator 2 4 ⑨ Microphone Input 6 ⑩ Mini USB Charging Port 9 8 7 10 Operation Power On/Off Turn on the PRO-XDT by pressing and holding the Power Button ② for 1 second. If the unit has sufficient battery power the Power Indicator light ⑦ will be green. This light will turn red when the remaining battery life is low.
PRO-XDR Receiver Parts And Functions ① Antenna 1 ② Volume Control ③ Power and Sync Button ④ Shoe Mount ⑤ Microphone Output 2 ⑥ Reset ⑦ Power Indicator ⑧ Signal Indicator 4 ⑨ Headphone Output ⑩ Mini USB Charging Port 3 5 6 10 9 8 7 Operation Power On/Off Turn on the PRO-XDR by pressing and holding the Power Button ③ for 1 second. If the unit has sufficient battery power the Power Indicator light ⑦ will be green. This light will turn red when the remaining battery life is low.
The EX-503XD Lapel Microphone EX-503XD The PRO-XD system comes with a custom designed lapel microphone. The lapel mic is omni-directional, powered by the transmitter (via plug-in power) and has a 4pole (TRRS) 3.5mm male connector. It comes with a lapel clip and attached windscreen. To use the lapel microphone with your system, simply plug it into the Microphone Input ⑨ of the PRO-XDT.
Setting Optimal Recording Levels If you are able to set the microphone recording level on your camera, it is generally best to keep the camera’s gain level low and set the output level of the receiver very high. This is because the preamps in most cameras tend to be of low quality and will add noise to the recording if a lot of gain is used.
Using The Aux Input A unique feature on the PRO-XDT transmitter is the inclusion of a 3.5mm stereo Aux Input. This input is intended for a line level signal and will not work with microphones (to use a microphone, plug it into the transmitter’s MIC IN). To use the Aux Input, push the Input Selector switch to the side with the letters “AUX IN” or in the center to mix it with the Mic Input. The Aux Input can be used to take any line level signal and transmit it wirelessly in stereo to the receiver.
SPECIFICATIONS PRO-XD Operating Freq.: Dynamic Range: Signal-To-Noise: Operating Range: Freq. Response: Digital Sampling: System Latency: Battery Life Span: Battery Type: Power Supply: Warranty: Accessories: RECEIVER (PRO-XDR) RF Output Power: Max Output Level: Mic Output: Headphone Output: Output Impedance: Battery Life: Battery Charge Time: Dimensions: Weight: 2.4GHz ISM Band 90dB 80dB 35m typical; up to 120m in ideal conditions.
