FMX-32 INSTRUCTIONS Azden Corporation 147 New Hyde Park Road P.O. Box 10 Franklin Square, NY 11010 vox 516.328.7500 • fax 516.328.7506 azdenus@azdencorp.com • www.azdencorp.
12 13 FMX-32 SPECIFICATIONS 14 Frequency Response Main and Unbalanced Output .................... 40-17,000Hz (– 3dB) Monitor Output ............................................ 50-17,000Hz (– 3dB) 16 15 16 Noise Level Left & Right Channel .................................. – 114dBu (A weighted, Input Equivalent Level) 17 2 1 T.H.D. ............................................................ >0.05% @ 1KHz (+10dBu output) 8 9 3 10 4 11 5 Balanced Output Level Electronic Balanced .............
Thank you for purchasing the Azden FMX-32 portable mixer. The FMX-32 has many unique features, so please read this manual completely before using the mixer. Designed to work with most microphones that have a low-impedance XLR output, the FMX-32 can be connected to any video camera or audio recorder, which has XLR, or mini-jack mic/line inputs. LOADING THE BATTERIES: Make sure the mixer is turned OFF. Remove the battery cover (A) by pressing in the clip, then lift up and remove the cover from the unit.
CH3 (5): Controls the input level (volume) of the microphone connected to Input CH 3 (14). Zero is the lowest (quietest) setting, 10 is the highest (loudest).For the best possible sound and lowest noise increase the input level control until the input LED lights occasionally. OUTPUT LEVEL LED INDICATORS (7) For the best sound increase the INPUT LEVEL of CH1, and/or CH2 and/or CH3, so that the corresponding PEAK LED indicator flashes red occasionally during the loudest parts of what you are recording.
