User Manual

6
Operating your radio
1- Carefully extend the telescopic aerial.
2- Press the POWER button to switch on your radio. The display will show
AZATOM Digital Radio”.
3- If this is the rst time the unit goes into DAB Mode, it will automatically start an
Auto Scan to search for available stations.
(Once DAB Mode has been used before, the radio will automatically select the
previously played station).
4- Press SCAN at any time will automatically start an auto scan.
During the scanning process, the lower line of the display shows a bar-graph
indicating progress of the scan and found number of stations.
5- When the scanning is completed the rst station (in alphanumeric order) will be
selected. The clock will automatically set to the current time.
6- If the station list is still empty after the scan your radio will display
“Service not available”.
7- If no stations are found, please ensure the aerial is extended and test the reception
by doing another auto scan in a different location.
Selecting a station – DAB
1- The top line of the display shows the name of the station currently selected
before is reverts to displaying the time. You can press the Menu button twice to
display the radio name again whilst its playing.
2- Press the TUN-/TUN+ button to choose from the list of available stations on the
lower line of the display, and push the SELECT button to conrm the desired
station.