User Manual

12
1- When the alarm sounds, pressing the SNOOZE button will temporarily silence the
alarm, you can choose the time from “5, 10, 15 and 30” minutes and snooze “off”.
2- The snooze function also has a countdown allowing you to see how long before the
alarm re-sounds.
3- When you choose SNOOZE OFF, the radio returns to standby mode, showing the
time and date. Press POWER to turn it on.
Stop Alarm:
When the alarm is sounding you can press the ALARM button one time to stop the
alarm sound. The radio will then return to Standby mode.
Disable / Enable Alarm:
If you want to disable or Enable the alarm at any time you can do the following.
Press and hold down the alarm button until it says either “Alarm 1 ON”, “Alarm 1 OFF”,
“Alarm 2 ON”, “Alarm 2 OFF”, “Alarm 1/2 ON”, “Alarm 1/2 OFF”.
Snooze - Stop Alarm
Aux-in mode plays audio from an external source such as a smart phone or tablet.
1- Plug on end of 3.5mm audio cable (excluded) into the headphone or line out jack
on your player, plug the other end of cable into the unit AUX-IN jack.
2- Turn on the external audio source and play your device.
3- Press MODE button to “Auxiliary Input” mode.
4- The volume level can be now controlled through the main unit.
Notes:
If you’re connected to the Line out Jack of your external device, then you only need
to adjust the volume control of this unit. If you’re connected to the Headphone Jack
of your external device, then you may need to adjust both the volume control of your
external device and the volume control of this unit to nd the most desirable volume
setting.
Please ensure the cable is disconnected to listen to the radio in other modes such as
DAB and FM.
AUX-IN