User's Manual

Azalea MST200 Quick Installation Guide

8 Power Cord Installation

MST200 use 100-240V AC as power, the power interface is on the left bottom of MST200.

Power cable should be the last step of installation.

Tools: Diagonal Pliers，paper knife

The procedure of power cable installation:

1． Point the female power plug to MST200 power port

2． lug the power cable firmly to the port, further tighten the connection by turning the

coupling ring, (which is already attached to the plug) clockwise;

3． Water proof the connection by wiring insulation Adhesive Tape and PVC

insulation type;

4． Secure the power cable follow to the pole with strap, but don’t make it too tight

5． The other side of power cable plug use normal 3 male pin connection to power

supply.

Installation of power cable must be done by experienced technician. Please

read the installation manual carefully before installation.

Before finally power up MST200, make sure grounding is done correctly