User's Manual

Azalea MST200 Quick Installation Guide

7 Ethernet Cable Installation

Ethernet cable connects MST200 mesh network to wire network. Ethernet cable is

needed, only when MST200 used as gateway. The performance of network cable will

degrade seriously with length longer than 100 meters. So in MSR nodes planning, it is

better to choose access point to wire network within 100 meters.

The process of Ethernet cable installation

1． Unscrew the protective cap on the Ethernet enclosure.

2． Plug Ethernet cable RJ45 head to MST200 Ethernet interface.

3． Water proof the connection by wiring insulation Adhesive Tape and PVC insulation

type;

Figure 14 Plug Ethernet Cable Head to MST200 Ethernet Interface

Figure 15 Plug Ethernet Cable Installation