User's Manual

AZALEA MSR4000 INSTALLATION GUIDE

6 Lightning Protection Installation

The lightning protector is to protect MSR4000 to avoid damage by burst high current from

lightning. Lightning protector should be installed between radio port and antenna feeder, and the

lightning protector should be connected with lightning system of the building .

Tools needed: Paper knife, Pliers, Crimping Pliers, Cross Screwdriver, and Spanners.

The procedure of lightning protector:

1． Connect the lightning protector to radio port of MSR4000;

2． Fasten the lightning protector by Spanner;

3． Unpack the copper ring of grounding.

4． Put the naked side of grounding wire into copper ring and pressed firmly by Crimping

Pliers;

5． Connect the grounding copper ring with lightning protector and fasten it by Cross

Screwdriver;

6． Connect the another side of grounding wire with grounding bar;

7． Daub butter on both side of grounding wire;

Lightning

Protector