Installation Guide

AZALEA MSR4000 INSTALLATION GUIDE

11.2 Configuring nodes with the Quick Setup Wizard

The basic software requirement for the web-interface is:

• Web Browser： Internet Explorer 5.5 and above with Javascript enabled

• Optimal Resolution：1024 X 768 and above

Accessing the Quick Setup Wizard

To access the WMI’s Quick Setup Wizard, input the IP address of that router and the port:

9080 in the address field of your web browser. On an un-configured MSR series router, you

can connect a client PC to the router’s Ethernet 0 port and use the port’s default IP address

of 192.168.0.1 to connect. A pop-up dialog box would appear and request a username and

password (see Error! Reference source not found.) The default username is ‘root’ and

password is ‘public’. After the successful authentication, the home page for WMI would

appear as shown in next figure

To open the Quick Setup Wizard, click the “Quick Setup” link in the left-side menu tree.

The Step 1 of the Quick Setup Wizard appears at the right side of the web page (see

Figure 2)