Installation Guide

AZALEA MSR4000 INSTALLATION GUIDE

6 Lightning Protection Installation

The lightning protector is to protect MSR4000 to avoid damage by burst high current

from lightning. Lightning protector should be installed between radio port and

antenna feeder, and the lightning protector should be connected with lightning system

of the building .

Tools needed: Paper knife, Pliers, Crimping Pliers, Cross Screwdriver, and Spanners.

The procedure of lightning protector:

1． Connect the lightning protector to radio port of MSR4000;

2． Fasten the lightning protector by Spanner;

3． Unpack the copper ring of grounding.

4． Put the naked side of grounding wire into copper ring and pressed firmly by

Crimping Pliers;

5． Connect the grounding copper ring with lightning protector and fasten it by

Cross Screwdriver;

6． Connect the another side of grounding wire with grounding bar;

7． Daub butter on both side of grounding wire;

Lightning

Protector