User's Manual

AZALEA MSR2000 INSTALLATION GUIDE

Power Installation Warning

The installation of power switch must be performed by a trained professional technician.

The power switch is not supplied with the MSR2000. The power cord must be assembled by a professional installer,

and the final assembly must comply with related requirements.

Solar Irradiation and high Temperature Protection

Please pay attention of sunlight which will make the working temperature of MSR2000 higher then the

specification

MR2000 would be located under sunlight. The solar shield which provided in Azalea standard package should be

installed to outdoor MSR2000. The Azalea Warrantee policy does not cover those outdoor products which Solar

shield is not installed for it. Please contact Azalea technical support engineers for detail information.

RF Device Protection

Before powering up MSR2000, RF port must be connected to valid load, powering up with unloaded RF

port is not allowed. Improper operation with power can cause damage of RF module. Azalea will not take any

responsibility for such damage.