User's Manual Part 3

〓MSR Series Quick Start Guide, AOS-v2.0〓

Chapter 4 Factory Default Configuration

When each MSR series is shipped, it is preloaded with a factory default configuration.

Table 6 outlines the factory default value for some of the important parameters.

Table 6 Syntax of the Setup Command

Setting Factory Default Value

Password public

Country Code US

Node ID 1

Router ID 192.168.10.1

Fast Ethernet 0 192.168.0.1/24

Fast Ethernet 1

Disabled

SSID for AP Azalea

Roaming Enabled

NAT Enabled

The following section shows the full factory default configuration as presented by the

“show running-config” command:

MSR2000# show running-config

hostname MSR2000

node-id 1

router-id 192.168.10.1

country-code US

interface dot11radio 0

wireless-mode g 1

mode access

bss Azalea

dhcp server automatic

interface dot11radio 1

wireless-mode a 36

mode backhaul

wds auto

interface fast-ethernet 0

ip address 192.168.0.1/24

interface fast-ethernet 1

shutdown

ip dhcp server

enable

Ethernet port 1 is not available on some MSR series models.