User's Manual Part 3

〓MSR Series Quick Start Guide, AOS-v2.0〓
Copyright 2007 Azalea Networks
11
Figure 7 Configuring the portal node, step 3
Figure 8 Configuring the portal node, step 4
After the last step of confirming the reboot is performed, the web interface would stop
responding for a few seconds while the router reboots itself. Note that since the quick
setup changes the IP address of the Ethernet 0 port on the router, you may need to re-
open the web interface using the new IP address if you were using Ethernet 0 to connect
to the router.
Example Configuration 2: Point node
The following figures show how the example point node can be configured by answering
the questions on each screen.