TDC Gobo Rainbow DMX LED gobo projector system User manual
Safety instructions WARNING! Always keep this device away from moisture and rain! Hazardous electrical shocks may occur! WARNING! Only connect this device to a matching power outlet. This device is intended to work on a specified AC currency. Connecting this device to power outlets with other voltages may result in permanent damage and possible hazardous situations, such as fire or electrical shocks! WARNING! Be careful with every operation of this device.
- Only handle the power cord by its connectors. Never pull the cable to remove a connector from its socket, as this could lead to damage and electrical shocks. - Always operate this device with a stable AC current. - Always operate this device with the AC ground wire connected to the electrical system's ground. - Never use other types of cables than specified in the manual, do not use defective or bad functioning cables.
Box contents Box contents 1x TDC Gobo Rainbow fixture 1x power cable Unit and accessory inspection - Always use the supplied power cable to connect the unit to a power supply. If the cable appears broken or has visible damage, do not use it. - If the unit is not going to be used for a longer period of time, disconnect it from the power supply and store it in a dust-free environment. - Always check the unit for possible damage before use.
Device overview 2 1 1 1 3 4 1 1 1 5 6 7 8 10 9 1. Beam output 2. Adjustable bracket 3. IEC power input with fuse 4. IEC power output (Power link) 5. DMX input (3p XLR) 6. DMX output (3p XLR) 7. Built-in microphone 8. Safety eye 9. Cooling fan 10.
Replacing or removing the gobos The Ayra TDC Gobo Rainbow is equipped with 6 lenses, each provided with a separate LED source and a gobo. A gobo is a certain pattern, which shapes the beam output in a certain pattern. It is possible to replace the gobos of the TDC Rainbow, for example with your own company logo, a certain message, or specific figures.
Setting up the unit To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet. The fixture will start up and show the last chosen setting on the display. Usually, with a new product, this is the DMX mode with the value set on 001. The display shows several settings, each with the possibility to set several values. Use the display and the menu buttons to set preferences, change settings and scroll through the menu.
which need to perform service intervals on all fixtures after several hours of performing, to maintain optimal shape. UERS: Displays the software version which is installed on the main PCB. The TDC Gobo Rainbow is equipped with several working modes, each with its own advantages. For simple events there are stand-alone modes, for advanced situations there are options to create synchronized lightshows, or controlled with a DMX-512 controller.
CH3 000-007 008-247 248-255 Black out Strobe slow to fast Sound strobe 000-255 000-255 000-255 000-255 000-255 000-007 008-247 248-255 000-007 008-022 023-037 038-052 053-067 068-082 083-097 098-112 113-127 128-142 143-157 158-172 173-187 188-202 203-217 218-232 233-247 248-255 000-007 008-255 Red Green Blue White Dimmer 0-100% No function Strobe slow to fast Sound strobe Manual Color chase 1 Color chase 2 Color chase 3 Color chase 4 Color chase 5 Color chase 6 Color chase 7 Color chase 8 Color chase 9
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH20 CH21 CH22 CH23 CH24 CH25 CH26 CH27 CH28 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255 Dimmer 0-100% 000-255
Technical specifications - Powerful six-fold gobo projector with intense beams Wide angle construction for optimal coverage Includes 6 replaceable gobo’s (also works without gobos as beam effect!) Light source: 6x 10W RGBW LED chip Individual LED chip control with dimmers for each colour, for creative colour combinations and chases Working modes: Automatic, music-controlled, master/slave, DMX Exciting built-in programs or full control with a DMX controller DMX operation: 1, 3, 8, 24 or 28 channels Adjustab
